Table of Contents
This is an old revision of the document!
IH: Engine Control
Kick Starter
- Starting July 1, 1973, there was a new design with kick starter ratchet gear, bushing and spacer. The new 'pressed in' bushing has a Teflon coated lead bearing surface on a steel ball shell. The gear has a groove for the starter gear spring and the spacer length (and diameter) were increased to fit the new gear. 1)
- The new ratchet gear assembly w / Teflon bushing was recommended for part replacement on all models built previous to July 1, 1973. However, these parts will not interchange with the old part numbers individually. 2)
| Starter Gear Ratchet Kits 3) 4) | |
| 33400-74 - 1970 and Earlier | Starter Ratchet Gear w/ Teflon bushing (33432-73) and Clutch Sprocket Spacer (37754-74) Also includes a replacement ratchet (33379-57) with a larger I.D. for the new larger gear bushing and 12 rivets, 5/32“x13/16”x9/32“ Dia. (8215) |
| 33460-74 - 1971 & later | Starter Ratchet Gear Assy. w / Teflon bushing (33432-73) and Clutch Sprocket Spacer (37754-74) |
| 1957 - Early 1973 | XL/XLH/XLCH | Starter Ratchet Gear Assy. w / bronze bushing 5) | 33432-57 |
| 1957 - Early 1973 | XL/XLH/XLCH | Starter Ratchet Gear (bronze) Bushing (only) 6) | 33442-57 |
| Late 1973 and later | XLCH | Starter Ratchet Gear Assy. w / Teflon coated steel bushing 7) | 33432-73 |
| Late 1973 and later | XLCH | Starter Ratchet Gear (Teflon coated steel) Bushing (only) 8) | 33442-73 |
| Clutch Sprocket Spacer | Length | Outside Diameter | ||
| 37755-57 9) | 1.047” | 1.3585“ | ||
| 37756-57 10) | 1.025” | 1.3585“ | ||
| 37755-71 11) | 1.143” | 1.3585“ | ||
| 37756-71 12) | 1.121” | 1.3585“ | ||
| 1957-1970 | XL/XLH/XLCH | 37754-74 13) | 1.047” | 1.3715“ |
| 1967 and later | XLH | 37753-76 14) | ||
| 1971 and later | XLCH | 37755-73 15) | 1.153” | 1.3715“ |
