REF: Tools - 129 - Sportsterpedia

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== REF: Tools - 129 ======
====== Spark Plug Tools ======

===== To Gap the Spark Plugs =====

|A small stainless plate 7/8" long by 3/8" wide and .040" thick with a \\ hole in it. It can be kept on a key ring and instead of keeping a feeler \\ gauge on your bike. ((Deep Diver of the XLFORUM http://xlforum.net/forums/showthread.php?t=395586&page=5))|
|{{techtalk:ref:tools:homemade-spark-plug-feeler-gauge_by_deep_diver.jpg?direct&400|}}|
^  Homemade Spark Plug Gapping Tool ((photo by Deep Diver of the XLFORUM http://xlforum.net/forums/showthread.php?t=395586&page=5))  ^

===== Flexible Extension for Dual Plug Heads =====
Care should be taken when installing the top spark plug on S models or any with dual plug heads. \\
It's easy to get into the wrong position and break the end of the plug with a conventional wrench. \\
This flexible extension allows you to maneuver the plug into the hole using the handle on the end to start the threads without much force. \\
If the plug doesn't thread easily, the grip will slip on the plug instead of forcing the threads together and cross-threading them. \\
Then you simply back it out, re-position and try again until the threads are started correctly. \\
Once the threads are started, remove the flex tool, use a conventional plug wrench to snug up and then a torque wrench for final tightening. \\

|
|{{:techtalk:ref:tools:flexible_spark_plug_extension_1_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ref:tools:flexible_spark_plug_extension_2_by_hippysmack.jpg?direct&300|}}|{{:techtalk:ref:tools:flexible_spark_plug_extension_3_by_hippysmack.jpg?direct&300|}}|

\\

[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace: • REF: Tools - 160 • REF: Tools - 120 • REF: Engine Control - Sub-50A • REF: Tools - 170 • REF: Tools - 147 • REF: Engine Mechanicals - Sub-07G • IH: Engine Mechanicals - Sub-09T • REF: Engine Mechanicals - Sub-05J • EVO: Engine Control • REF: Tools - 101