REF: Engine Mechanicals - Sub-07J

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== REF: Engine Mechanicals - Sub-07J ======
====== Further Study of the 79-E82 Reed Valve ======

===== 1979-E1982 Breather Valve=====

  * Reed Valve Assembly (26909-79).
  * Breather vent fitting thread size at the cam cover is 1/8" NPT. ((IronMick of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/108888-cam-cover-vent-thread-size?t=1003815))
  * Rubber hose connects to the cam cover fitting at the 10 o’clock position and runs to the stock air filter. \\ This way any oil mist that makes it past the reed valve is fed back through the engine.

{{:techtalk:ih:engmech:79_breather_valve_by_tobybott.jpg?direct&350|}} ((photo by tobybott of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/42665-79-ironhead-breather-check-valve?highlight=breather#post877147)) {{:techtalk:ih:engmech:reed_valve_by_lodkolv.jpg?direct&300|}} ((photo by lodkolv of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/ironhead-sportster-motorcycle-talk-1957-1985/42665-79-ironhead-breather-check-valve/page2?t=113861&highlight=breather&page=2)) \\


{{:techtalk:ref:engmech:79-e82_reed_valve_operation.png?direct&600|}} ((drawing by Hippysmack)) \\

\\


[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace: • REF: Tools - 120 • REF: Extra Models11 • Formatting Syntax • IH: Engine Mechanicals - Sub-09E • REF: Tools - 122 • REF: Tools - 162 • REF: Tools - 143 • IH: Engine Mechanicals - Sub-09A • REF: Tools - 132 • REF: Tools - 168