IH: Oiling & Lubrication - Sub-01R

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== IH: Oiling & Lubrication - Sub-01R ======
\\
====== Oil Check Valve Replacement Options ======
**The closest on the Circle Seal website** is a [[http://www.circle-seal.com/products/check_valves/c2900/index.html|2900 series cartridge check valve]]. \\
Click on the 2900 series in the catalog section to the left on the their site.

In the Products-Engineering-Terminology PDF; \\ 
<blockquote>Flow capability (Cv=0.55).
Flow capability indication commonly accepted by the valve industry.
The literal definition is that a component with a Cv of one (1); \\
Can flow one (1) gallon of water with a ΔP of one (1) PSI. \\
The calculated results from Cv equations must be considered reasonable approximations only.</blockquote>

**Link to the Circle Valve site with comparable dims and specs**: \\
[[https://catalog.circlevalve.com/item/check-valves/c2900-series-cartridge-check-valve-0-to-3000-psig/cs-c2949b-4q]] \\
This one has a back-up O-ring on the valve. \\
That link came from this XLF thread: \\
[[http://xlforum.net/forums/showthread.php?t=1979566&highlight=gerotor&page=2]]



\\

[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg|}}]]

Trace: • navigation • EVO: Oiling & Lubrication - Sub-03E • REF: Tools - 126 • EVO: Electrical System - Sub-03A

Navigation

Search

Toolbox