Differences

This shows you the differences between two versions of the page.

--- techtalk:evo:elec03 [2024/10/07 15:50] – [Indicator Lights - Idiot Lights] ixl2relax
+++ techtalk:evo:elec03 [2025/01/06 16:20] (current) – [TURN SIGNALS] ixl2relax
@@ Line 490: / Line 490: @@
 | YEAR | Indicator | Activated By |
-| 86-91 |  HiBeam  | Powered from Hi/Lo Switch 'HI' |
+| 86-91 |  HiBeam  | Powered from Hi/Lo Switch when on 'HI' |
-| ::: |  Turn  | Single Lamp - Powered from either TS Switch Active |
+| ::: |  Turn  | Single Lamp - Powered when either TS Switch Active |
 | ::: | HiBeam & TS Indicators Are Always Grounded ||
 | ::: |  Neutral  | Grounded when Neutral Switch Active|
-| ::: |  Oil  | Grounded when Oil Pressure Switch 'Low' Pressure |
+| ::: |  Oil  | Grounded when Oil Pressure Switch has 'Low' Pressure |
-| ::: | Neutral & Oil Indicators Are Always Powered from Acc Circuit ||
+| ::: | Neutral & Oil Indicators Always Get Power from Acc Circuit ||
-| 92-13 |  HiBeam  | Power from Hi/Lo Switch |
+| 92-13 |  HiBeam  | Powered from Hi/Lo Switch when on 'HI' |
-| ::: |  L. Turn  | Power from Left TS output of TSM |
+| ::: |  L. Turn  | Power from Left TS output circuit of TSM |
-| ::: |  R. Turn  | Power from Right TS output of TSM |
+| ::: |  R. Turn  | Power from Right TS output circuit of TSM |
 | ::: | HiBeam & TS Indicators Are Always Grounded ||
 | ::: |  Neutral  | Grounded when Neutral Switch Active|
-| ::: |  Oil  | Grounded when Oil Pressure Switch 'Low' Pressure |
+| ::: |  Oil  | Grounded when Oil Pressure Switch has 'Low' Pressure |
 | ::: | Neutral & Oil Indicators Are Always Powered from Acc Circuit ||
-| 14-22 |  HiBeam  | Grounded from Speedometer Connection |
+| 14-22 |  HiBeam  | \\ Each Indicator is grounded from the Speedometer\\ based on system operations as communicated to\\ the Speedometer from the ECM over the CANbus.|
 | ::: |  L. Turn  | ::: |
 | ::: |  R. Turn  | ::: |
 | ::: |  Neutral  | ::: |
 | ::: |  Oil  | ::: |
-| ::: | All Indicators are Powered from Speedometer Connection ||
+| ::: | All Indicators are Powered from Always-On Battery Fuse ||
+| Note: TS means Turn Signal / TSM means Turn Signal Module |||
 **Bulbs**
@@ Line 526: / Line 527: @@
 The indicator lights are LEDs that are soldered onto a circuit board strip (SMDs). These individual LEDs are activated by the Speedometer, which communicates with the ECM/BCM via the CANbus.
-Here is DIY info regarding the repair of faulty indicator lights (2014-later).
+Here is DIY info regarding the repair of faulty indicator lights.\\
-  * [[techtalk:evo:elec03b|Subdoc - Indicator / Warning Lights Not Working - Repair]]
+  * [[techtalk:evo:elec03b|Subdoc - Indicator / Warning Lights Not Working - Repair (2014-later).]]
+An interesting repair in this [[https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/rubber-mount-sportster-motorcycle-talk-2004-2006/202706-repair-of-trim-plate-indicator-lamps-68513-95a?t=2079909|XLForum Thread]] by Krono.
 **INDICATOR LIGHTS PARTS LIST**
@@ Line 548: / Line 551: @@
 ^ 2007 Custom Models - LEDs ||
 | | LEDs & Housing part of Harness (68814-07)\\ 68382-07B Trim Plate & Bezel Assy (Symbols/Clear Lense) |
-An interesting repair in this [[https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/rubber-mount-sportster-motorcycle-talk-2004-2006/202706-repair-of-trim-plate-indicator-lamps-68513-95a?t=2079909|XLForum Thread]] by Krono.
 \\
@@ Line 624: / Line 625: @@
 \\
+**( [[techtalk:evo:engctl03b|SUBdoc - VSS / Speedometer / TSM Control Signals]] )**
 **( [[techtalk:evo:elec03g|SUBdoc - BASIC TESTING of Turn Signal Wiring]] )**