EVO: Carburetor, Intake Manifold & Exhaust

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
[[:techtalk:menu|{{  :techtalk:gototechnicalmenu.jpg|}}]]
====== EVO: Carburetor, Intake Manifold & Exhaust ======



====== Air Cleaner (AC) ======
\\

===== Mounting Bolts =====
**Thread sizes**: \\
86-90: 5/16"x18 ((ericfx1984 of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-era-specific-and-model-specific/frame-mount-evo-sportster-talk-1986-2003-models/196577-1987-883-breather-bolts-are-different#post4295094)) \\
91-Up: 1/2"x13 \\

91-03 breather bolts. \\
{{:techtalk:evo:carb:91-03_breather_bolts_1_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack)) {{:techtalk:evo:carb:91-03_breather_bolts_2_by_hippysmack.jpg?direct&300|}} ((photo by Hippysmack))

04+ breather bolts. \\ 
{{:techtalk:evo:engmech:04_up_breather_bolt_3_by_folkie.jpg?direct&300|}} ((photo by Folkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/28874-stock-air-cleaner-box-modifications/page20#post4310316)) {{:techtalk:evo:engmech:04_up_breather_bolt_2_by_folkie.jpg?direct&300|}} ((photo by Folkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/28874-stock-air-cleaner-box-modifications/page20#post4310316))  {{:techtalk:evo:engmech:04_up_breather_bolt_1_by_folkie.jpg?direct&300|}} ((photo by Folkie of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/28874-stock-air-cleaner-box-modifications/page20#post4310316)) 

===== Backing Plate =====
Here is the OEM ham can without the filter. \\
The two bolts on either side of it are the breather bolts that go into the heads. \\
(and where the oil mist comes out). \\
With the stock configuration, the mist is vented back into the intake.  \\

|Backing plate (29367-07A)((photo by Hagen of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-intake-and-exhaust/sportster-motorcycle-air-intake-carburetor-efi-fuel-and-exhaust/44522-show-me-your-non-stock-breather-systems/page11?t=146084&page=11))|
|{{:techtalk:ref:engmech:breather_mod_1_by_hagen.jpg?direct&300|}}|

===== Screaming Eagle Air Cleaners =====

SCREAMIN’ EAGLE® PRO HIGH-FLOW AIR CLEANER KIT FOR SPORTSTER® MODELS. ((Bedore of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/116670-k-n-installation-issue/page2?t=1122520&page=2))  \\
(For race application only)\\
This air cleaner kit provides increased air flow when used with stock, or Screamin’ Eagle carburetors.\\
It includes a composite backplate, an air cleaner cover adapter, and a high flow, washable element that does not require oiling (K&N).\\
The breather system also has been redesigned to route breather gases directly into the inlet of the carb to minimize excess oil in the A/C assembly.

29042-04A:\\
Fits 2004-later XL models with stock air cleaner cover.\\
If using HD Swingback air cleaner cover 29742-04 a separate purchase of adapter kit P/N 29848-04 is required. $109.95 29066-03:\\
Fits 1988-2003 XL models. $109.95

For instruction sheets, [[techtalk:miscres:miscres08#carburetor_intake_manifold_exhaust|Click Here]] to go to the Instructions page in the Sportsterpedia. \\
Click on the "Y" next to sheet# J03274 for the air cleaner kit and and sheet# J03214 for the adapter kit to download and them.\\

|  SE Air Cleaner (29066-03) ((photos by Bedore of the XLFORUM https://www.xlforum.net/forum/sportster-motorcycle-forum/sportster-motorcycle-general-discussion-and-problems/116670-k-n-installation-issue/page2?t=1122520&page=2))  ||
|{{:techtalk:evo:carb:se_air_cleaner_1_by_bedore.jpg?direct&300|se_air_cleaner_1_by_bedore.jpg}}|{{:techtalk:evo:carb:se_air_cleaner_2_by_bedore.jpg?direct&300|se_air_cleaner_2_by_bedore.jpg}}|

\\

29042-04B:\\
SCREAMIN' EAGLE® HIGH FLOW AIR CLEANER KIT
Fits 2004-later XL Sportster® model motorcycles with Stock air cleaner cover. \\
If using HD Swingback air cleaner cover 29742-04 a separate purchase of adapter kit P/N 29848-04 is required.
**NOTE**: EFI models must recalibrate the ECM when installing this kit. Failure to properly recalibrate the ECM can result in severe
engine damage. \\

For instruction sheets, [[techtalk:miscres:miscres08#carburetor_intake_manifold_exhaust|Click Here]] to go to the Instructions page in the Sportsterpedia. \\
Click on the "Y" next to sheet# J03663 for the air cleaner kit and and sheet# J03214 for the adapter kit to download and them.\\


{{:techtalk:evo:carb:se_eagle_high_flow_air_cleaner_kit_29042-04b_by_d_s_cycle_connection_pic1.jpg?direct&400|}} ((photo courtesy of Ebay seller, D's Cycle Connection [[https://www.ebay.com/str/dscycleconnection?_trksid=p2047675.l2563|Link to Store]] ))  {{:techtalk:evo:carb:air_cleaner_adapter_29848-04_by_d_s_cycle_connection_pic1.jpg?direct&400|}} ((photo courtesy of Ebay seller, D's Cycle Connection [[https://www.ebay.com/str/dscycleconnection?_trksid=p2047675.l2563|Link to Store]] ))  \\

\\

SCREAMING EAGLE EVOLUTION XLH HI-FLO CARB & AIR CLEANER Kit (29081-90C). \\
This kit is for SE carbs that have a round press-in fit to a tapered manifold adapter (7/8" thick) that bolts to the 2 hole manifold. \\
[[https://sportsterpedia.com/doku.php/techtalk:miscres:miscres08#carburetor_efi_and_air_cleaner|Click Here]] to go to the Instructions page of the Sportsterpedia. \\
Click on the "Y" next sheet J00050. \\






\\

[[:techtalk:menu|{{:techtalk:gototechnicalmenu.jpg?nolink&}}]]
Trace: • REF: Wheels, Brakes & Tires • REF: Suspension - Sub-02D • IH: Electrical System - Sub-03F • REF: Custom Painting • REF: Tools & Fasteners • REF: Suspension • REF: Wheels, Brakes & Tires • REF: Wheels, Brakes & Tires • EVO: Electrical System - Sub-03B • REF: Oiling & Lubrication - Sub-05H